The Z-Laser is an anodized aluminum enclosure with a 1 3/4″ wide frame. It is available as an overlap fit. This enclosure can be installed on zero clearance boxes with marble, tile or any non-combustible material up to 5/8″ thick.
The Special Z offers a classic look at an affordable price. The unit is designed from anodized aluminum and features bi-fold full swing trackless doors. Available only as an inside fit, the unit incorporates a 7/8″ wide frame. Air space is allowed from the top, sides or bottom providing the same air flow as the zero clearance fireplace.
A zero-clearance fireplace can provide a home with years of performance; however, the look can become outdated and not match a room’s current décor. A simple solution to enhance and provide your existing fireplace with a fresh appearance is a Complete Reface Door Enclosure. Constructed of 1″ steel square tubing for a welded frame. Please note that the door needs to be installed in such a manner that it sits on the hearth for support.
Enhance the appearance of an existing direct-vent fireplace by adding a Direct-Vent Fireplace Accessory Mesh Door. Three different louver styles are available including the Leaf Scroll, Diamond or Navaho Louver to complement any room. Accent any room by adding an eye appealing mesh door that attaches to an existing fireplace door with extra strength magnets. It’s as easy to install and makes for easy glass cleaning. Perfect for any direct-vent fireplace.
Thermo-Rite’s stock Z-Doors are made as inside fits. We use Air Studs™ or an Air Draft Bar™ to elevate the frame so that it maintains the cooling air intakes located inside the firebox. In most applications, we allow an air space between the outside of the enclosure and the firebox opening. The Z-Door is a sleek, full-framed, tarnish free anodized aluminum enclosure.
The Laser provides a 1 3/4″ wide “bar stock” look at a fraction of the cost. The 1 3/4″ wide anodized aluminum frame protrudes 3/8″ out from the face of the fireplace. The frame overlaps the opening 3/4″ on each side and the top. The frame overlap includes the inside fit clearance tolerances.
The Rectangular Heritage with Arched Doors is a seamless lasercut ¼” welded steel plate frame with either a 1 ¾” or 2 ½” wide frame. It is available as an overlap or inside fit. The maximum overlap for 1 ¾” frames is ¾” each side and ¾” top. The maximum overlap for 2 ½” frames is 1 ½” each side, 1 ½” top. The inner return of the frame will extend 2 ½” into the opening. For special requirement, shapes or sizes, please contact the factory.